Local On-site
After-sales Engineers on-site;

Yes. This series supports FIPFG (formed-in-place foam gasket) dispensing and sealing on 3D irregular parts. Model selection should be based on part geometry complexity, sealing path requirements, and the material system (PU foam or 2-component silicone) to match the correct machine configuration.

A sealing-strip foam dispensing machine forms a PU foam gasket or a two-component silicone sealing bead directly on a part surface, commonly used on electrical control cabinets, EV battery packs and energy storage systems, and PV equipment. To judge IP suitability (e.g., targeting IP67), you must verify the full sealing chain—enclosure design, material compatibility, bead geometry, process repeatability, and validation testing to IEC 60529—rather than relying on the machine alone.

Yes. Our sealing strip foam dispensing machine supports remote maintenance and real-time monitoring of operating status, which helps overseas factories (Europe, Middle East, Asia) with daily operation & maintenance and faster fault troubleshooting.

Yes. This FIPFG (Formed-In-Place Foam Gasket) foam gasket dispensing machine series can support seals that achieve IP67 when the enclosure design, gasket material (e.g., PU foam or 2K silicone), dispensing parameters, curing, and IEC 60529 verification testing are correctly implemented.

Support is available, and customized solutions and equipment configurations can be provided to match the workpiece structure, production line cycle and target protection level for FIPFG in-situ foaming sealing process, targeting the application needs of PU foam gaskets or two-component silicone sealants.

In continuous FIPFG (Formed-In-Place Foam Gasket) production, energy use should be evaluated together with material utilization and process stability. YINGNAN’s sealing strip foam dispensing machine series is designed around long-run PU foam gasket and 2-component silicone sealing processes, which helps keep overall operating cost (raw material + wear parts + uptime) controllable and supports stable long-term operation; exact kWh depends on the configured pumps, heaters, and cycle parameters, so peer comparison should be done via a standardized trial and power logging.